PRODUCTS & SERVICES

Our support partner updates their engineers regularly with product trainings to ensure that they are knowledgeable on our range of drilling fluids. This will guarantee that we will be dynamic partners to our clients, providing the best possible expertise in the market today

OUR TECHNOLOGY

  • TECHNOLOGY
  • DRILLING FLUIDS
  • TURN-KEY CUTTINGS WASTE MANAGEMENT SYSTEM
  • CONTAINERIZED WASTE CUTTINGS MANAGEMENT SYSTEM
  • PRODUCED WATER TREATMENT SYSTEM

The oilfield business comprises two core divisions – drilling fluids and drilling waste management. For 3P-ES with our strategic partner’s support, these core divisions together form a workflow which is time and cost effective, while in complete compliance with international environmental standards

The drilling fluids solutions we therefore provide, have a complete range to meet a wide array of clients’ requirements and also cater to the most challenging wells such as horizontal, multilateral, deep water and high temperature-high pressure (HTHP) wells.

Our support partner updates their engineers regularly with product trainings to ensure that they are knowledgeable on our range of drilling fluids. This will guarantee that we will be dynamic partners to our clients, providing the best possible expertise in the market today

3P-ES provides a complete range of engineering services and drilling fluid solutions to meet the wide array of clients’ requirements. Our support partner’s team of highly skilled and trained drilling fluid engineers is both based on clients’ rigs and at laboratory facilities to support the formulations and smooth operation of drilling activities.

Our support partner’s engineers are regularly updated with product training to ensure optimum knowledge of our drilling fluids so that 3P-ES remains a dynamic partner to our clients, providing the best possible expertise in the market today.

3P-ES with our support partner’s Drilling Waste Management Services reduce the waste generated during drilling activities to acceptable environmental levels. Our waste management services are based on our Waste Management Hierarchy which governs the way we deal with solids control and waste disposal. In its basic form, this hierarchy is divided into 4 levels: reduction at source, recycling, treatment and disposal.

To ensure that these steps are adhered to, accurate planning which takes into account both environmental protection as well as cost-effectiveness is imperative. This involves studies to review both the project and the disposal criteria. Ultimately, the methods employed follow the Best Practicable Environmental Option and Best Available Technology.

Containerized Unit which is built inside a 20-foot-high cube shipping container with proprietary control system, self-priming discharge pump, solids discharge chute and onboard centrate processing tanks, the turn-key system is the perfect solution for processing 25 to 40 tons per hour. 

The unit can be transported on trailers, supply boats and cranes, and still offers the same technological advantages, capabilities and parameters that have made the process so successful.

PRODUCED WATER TREATMENT SYSTEMS ADVANTAGES: 3P systems are the greenest possible designs with many advantages over other methods of removing oil from water:

CAPTURE MORE SELLABLE OIL. Current methods remove most of the oil but virtually none of the really small oil droplets. All of the water is processed and very small oil droplets too small to rise to the surface naturally are removed

SAVE WITH LOW MAINTENANCE. Coalescing plate systems are cleanable and can often be cleaned in place, making maintenance easy in addition to being infrequent. Unlike filter cartridges, our coalescing plates are not used up like coalescing cartridges and have an extremely long field life. Ten years or more life before replacement is possible, making maintenance infrequent. Our oil water coalescer design helps you meet your goals. 

NO ABSORBENTS USE. Eliminates absorbent coast and disposal cost from the process. Unlike cartridge type coalescers, coalescing plate separators can recover from large amounts of surfactants (soaps or detergents) which would require replacement of cartridge type coalescers.

3P-ES provide the full line of drilling waste management equipment for the pitless drilling, with 3P Solids Control products, operators are able to run the closed loop mud circulation system to reduce the cost for drilling waste handling.

3P Drilling Cuttings Management System is a package system for the drilling rig to dry the OBM, SBM or WBM drilling cuttings and recycling the drilling fluids after cleaning by the decanter centrifuge.

3P Vertical Cuttings Dryer is a components for the cuttings drying by centrifugal G force.

Dewatering Unit provides a process of chemically enhanced configuration to remove the fine solids less than 5 microns from the water based drilling fluids.In a result to reduce the waste based mud waste.

3P high drying shaker is a simple and economic way to reduce the fluids on the drilling cuttings.

3P Waste decanter centrifuge is to separate the fine solids in the drilling waste.

3P Screw Conveyor is the product for transfer the drilling cuttings or drilling waste.

Centrifuge feed pump include the screw pump and vertical centrifugal slurry pump for different applications.

Drilling Cuttings Transfer Pump is a vacuum pump for transfer drilling cuttings and waste.

OUR 5 STEPS TO ZERO DISCHARGE METHODOLOGY

Drilling wastes are the second largest volume of waste, behind produced water, generated by the oil and gas exploration and production industry .

Two types of waste – drilling fluid waste and drilling cuttings

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

The reduction in waste from production source, reuse and recycle waste, treatment of waste produced by existing methods, recycling waste in a way that is recovered from new material waste, the final disposal of the waste is safe and safe for the environment

OUR SERVICES

DRILLING WASTE MANAGEMENT

3P-ES with our support partner’s Drilling Waste Management Services reduce the waste generated during drilling activities to acceptable environmental levels. Our waste management services are based on our Waste Management Hierarchy which governs the way we deal with solids control and waste disposal. In its basic form, this hierarchy is divided into 4 levels: reduction at source, recycling, treatment and disposal.

To ensure that these steps are adhered to, accurate planning which takes into account both environmental protection as well as cost-effectiveness is imperative. This involves studies to review both the project and the disposal criteria. Ultimately, the methods employed follow the Best Practicable Environmental Option and Best Available Technology.

INSTALLATION, OPERATION & MAINTENANCE

As part of our drilling waste management services, 3P-ES with our strategic partner’s support, also supplies highly skilled staff to ensure equipment are correctly installed, fully operational and well-maintained.

Their team employees are on-call 24 hours a day, every day and are trained to provide support at a moment’s notice. In addition, our company carries comprehensive spares in numerous stocking locations to ensure minimum disruption or down-time to our clients’ operations arising from any technical incidents.

PROJECT MANAGEMENT

In order to achieve specific objectives within a specified timescale and budget, 3P-ES with our strategic partner support has developed a clear and concise Waste Management Program.

This program, which is available to clients as a whole or in parts, according to clients’ needs, enables us to:

1) Identify waste streams, discern performance indicators and offer the best, cost-effective technical solutions and resources available

2) Determine the best methods for safe and healthy operational practice and management control

3) Provide our clients with a report on specific performance data that includes recommendations for future improvements.

Close Menu